home arrow dialup arrow macintosh arrow OSX 10.2
PDF Print E-mail
Mac 10.2 Dial Up Setup

 

Below is manual configuration guide for Mac OSX 10.2 to connect to the Hotkey Dialup Service.

 

 

Close any programs you have open.

 

 

Locate the Apple menu in the top left hand corner.

 


 

Click Apple then System Preferences...

 

 

The System Preferences dialog box will appear.

 


 

Click Network.

 

 

Locate the Location pull down menu located at the top of the dialog box.

 


 

Select New Location to continue.

 

 

The Name your new location dialog box will appear.

 


 

Type in Hotkey Dialup then click OK.

 

 

Locate the Show pull down menu.

 


 

Select Internal Modem from the pull down menu.

 

 

The Hotkey Dialup configuration dialog box will now appear.



 

Make sure the TCP/IP tab is selected, then select Using PPP from the Configure pull down menu. In the DNS Servers configuration box type 202.138.0.10 then press return and type 202.138.0.11 Next click the PPP tab.

 

 

The PPP tab will appear.

 


 

Type Hotkey in the Service Provider field followed by your Account Name (complete email address) and Password making sure these match the details provided to you by Hotkey. In the Telephone Number field type 0198380000. Place a tick in Save password then click PPP Options.

 

 

The PPP options dialog box will appear.

 


 

Place a tick in Connect automatically when needed, Redial if busy and Use TCP header compression. Then click OK to continue.

 

 

Click Apply Now located in the bottom right hand corner of the dialog box, then close the Network configurations dialog by clicking the red dot in the top left hand corner.

 

 

Your computer is now configured and ready to surf the Net.

 
© Hotkey Internet Services Pty Limited
Terms & Conditions   Privacy Statement   Acceptable Usage Policy