1. Please first ensure that you have connected your modem correctly. This involves:

a) Connecting the modem to your computer via the supplied Ethernet cable. The LAN LNK light should be on. If the light does not come on, make sure your network card is enabled.

b) Connecting your phone line to the modem. The WAN LNK light should be on . This may take a minute once the cable is connected. If you have a phone connected to the same phone line, this phone should be connected via a micro filter.

2. Open your web browser: Internet Explorer, Firefox or Safari.

3. Type this in your address bar: http://192.168.1.1

4. Username: admin
    Password: password

5. Click Launch Netcomm NB1300 Quick Start

6. Internet Explorer will launch and display the dialog below. If you experience trouble viewing this dialog, your browsers proxy settings may need disabling.

In the Username field type your username followed by @primusdsl or @dsl2.iprimus.com.au, depending on the type of account you have (if unsure please check your Service Summary sheet, this is on an A4 sheet sent with your modem), then type your password into the Password field. Next select PPPoA VC-Mux from the WAN Type pull down menu, then click Submit.

7. Click Save Setting and Reboot located on the left.

8. The Save setting and reboot dialog will appear.

Click Save & Reboot

9. Your NB1300 ADSL modem will now reboot

Please wait 1-2 minutes while this process takes place.

10. After your modem has completed rebooting, the following dialog will appear.

You are now connected and ready to surf the Net.