If you're setting up the iConnect Access 622 for the first time you should run the Provided iConnect CD first and you will be prompted with detailed diagrams to assist you in connecting each device.

The Following Diagram shows the rear of the iConnect Access 622 Unit and may assist you in correctly connecting the unit.

The Following diagram shows the LED indicators on the iConnect Access 622

The Power LED indicates the unit is switched on.

The Ethernet LED indicates the unit is connected to your computer via Ethernet, it will flash to indicate traffic on the Ethernet Interface.

The USB LED indicates the unit is connected to your computer via USB, it will flash to indicate traffic on the USB Interface.

The DSL LED indicates the unit is synchronised with the ADSL equipment at the Telephone Exchange, it will flash slowly and steadily to indicate it is "Training" or trying to get sync, and will flash rapidly to indicate data transfer over the ADSL Service.

The Internet LED indicates the unit has connected to the Internet.